Скачать с ютуб How to exchange the battery of the FOCUS-1 device | FOCUS-ON в хорошем качестве

How to exchange the battery of the FOCUS-1 device | FOCUS-ON

A step by step guide to replace the in house battery of the FOCUS-1 device on site. 1. Cut the sealing off from the right side of the Electronics housing 2. Loosen the screw of the locking tab 3. Remove the cover to get access for the inside 4. Remove the antenna cable’s fixing sealing, and disconnect the cable from the board 5. Disconnect the cable connectors from the right section 6. Get off the two fixing screw 7. Disconnect the LAN cable 8. Remove the electronics 9. Remove the main board from the stack. 10. Replace the lithium battery. 11. Reinstall the main board to the stack. 12. Put the electronics back to the housing. 13. Connect the LAN cable and all of the cable connectors onto the board’s right section, make sure you are following the right order 14. Connect the cable to the board, and fix it with a plastic seal onto the board 15. Fix the electronics using the two fixing screws. 16. Put the cover back on the housing and lock it using the locking tab. 17. Place a sealing wire as shown on the video and put the plastic sealing over the wires. 18. To lock the plastic sealing, use the special sealing plier. All information about the FOCUS-1: https://www.focus-on-process.com/ #smartmetervalve #batteryexchange