Скачать с ютуб How to exchange the computer module of the FOCUS-1 device | FOCUS-ON в хорошем качестве

How to exchange the computer module of the FOCUS-1 device | FOCUS-ON

A step by step guide to replace the on board compute module & be SMART in control & measurement. 1. Cut off the sealing from the right side of the Electronics housing 2. Loosen the screw of the locking tab (Allen key, size 3) 3. Remove the cover to get access for the inside 4. Remove the antenna cable’s fixing sealing, and disconnect the cable from the board 5. Disconnect the cable connectors from the right section 6. Remove the two fixing screw 7. Disconnect the LAN cable 8. Remove the electronics 9. Put the new electronics back to the housing. 10. Connect the LAN cable and all of the cable connectors onto the board’s right section, be careful of following the right order 11. After connecting the cable to the board, fix it with a plastic seal on to the board 12. Fix the electronics using the two fixing screws. 13. Place the cover of the housing back and lock it using the locking tab. 14. Place a sealing wire as shown on the video and put the plastic sealing over the wires. 15. To lock and form this (?), use the special sealing plier. All information about the FOCUS-1: https://www.focus-on-process.com/ #smartmetervalve #computermoduleexchange