Скачать с ютуб SmallRig 3948 Camera Cage for OM System OM-1 Mark II в хорошем качестве

SmallRig 3948 Camera Cage for OM System OM-1 Mark II

SmallRig 3948 is the only camera cage for OM System OM-1 Mark II. It is also compatible with the Olympus OM-D E-M1 III and E-M II, as well as the original OM-1. The SmallRig 3948 is a half-cage for the Olympus OM-1 and the OM System OM-1 Mark II, since these cameras are physically identical. It is somewhat compatible with the E-M1 III and the E-M1 II but the cable clamp aspect won't fit these older cameras. SmallRig 3948 Specs - Weigh: 120g - 1/4"-20 threaded holes - 3/8"-16 threaded hole with ARRI locating holes - Angled cold shoe - NATO rail on left - Arca-Swiss compatible bottom - Flat-head screwdriver magnetically attached - Strap holes on bottom for wrist strap or shoulder strap SmallRig 3948 Disadvantages - Generic cage (E-M1 II, E-M III, OM-1, and OM-1 II) - Loose bottom screw - No M2.5 screw for the eyelet - No indentation for the camera foot protrusions. So there is visible space between the camera bottom and the cage as the camera sits further up than necessary. - No padding on the inside of the cage - Half cage so there is no right hand options for mounting or attaching a grip - Less mounting options on top - Cold shoe doesn’t have an anti-slip pin. A cold shoe can be attached but adds weight - No NATO rail on top. A NATO rail can be attached but adds weight and will be less secure as it needs to be connected with screws. - Not possible to attach or detach the cage without taking off the lens, if the lens is moderately big. SmallRig 3948 Advantages - Because it’s a half-cage, it’s light (120g) - Provides additional mounting options instead of using the camera cold shoe. It is the only camera cage for the OM-1 Mark II and the original OM-1 so irrespective of how good or bad it is, there are no other options. But I would like to see an update to this cage to make a dedicated cage for the OM-1 so that compromises won’t have to be made. So they could have a fixed position screw at the bottom. Also they could add an M2.5 screw for the eyelet to further stop the camera from moving. Also introduce indentations on the bottom of the cage so that the camera fits better in the cage without any gap between the camera and the cage. 🎥 Video Timestamps / Chapters 🎬 00:00 SmallRig 3948 Specs 01:53 SmallRig 3948 Disadvantages, Problems, Issues 07:01 SmallRig 3948 Advantages 07:51 Conclusion 👉 See more OM System OM-1 related videos on:    • Olympus OM-1 and OM System OM-1 Mark II