Русские видео

Сейчас в тренде

Иностранные видео


Скачать с ютуб How to replace the drain pump of the Dishwasher? | Miele в хорошем качестве

How to replace the drain pump of the Dishwasher? | Miele 9 месяцев назад


Если кнопки скачивания не загрузились НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу страницы.
Спасибо за использование сервиса savevideohd.ru



How to replace the drain pump of the Dishwasher? | Miele

This video shows how to replace the drain pump in Miele dishwashers. The safety and warning instructions at the beginning of the video must be read in full before starting work and observed during the work. The maintenance work shown in the video may only be carried out by electricians with professional training, expertise and experience. Error indication: Display message F11 - Water drainage error, LED close/drain flashes. Water is standing in the machine and is not being pumped out. Repair time: approx. 30 min. Tools required for the repair: Spare part for the lye pump Safety gloves Screwdriver T20 towels Syringe (optional for residual water) The drain pump is available here: https://www.miele.co.uk/e/-drain-pump... For more information about the appliance, visit us here: https://www.miele.co.uk/c/miele-buyer... Accessories and care products can be found here: https://www.miele.co.uk/e/dishwasher-... https://www.miele.co.uk/e/miele-dishw... If you have any problems, you can find help at: www.miele.com/service Intro & safety and warning instructions: 0:00 Take out lower basket, remove spray arm and strainer and skim off residual water: 2:24 Remove drain pump cover and remove residual water with syringe or a towel: 2:45 Disconnect the appliance from the mains: 3:03 To reach the cover plate, remove the furniture front if necessary: 3:14 Unscrew the screws of the cover plate with a T20 screwdriver and remove the cover plate downwards: 3:46 To collect residual water, place a towel under the drain pump and disconnect the plug: 4:02 Unlock the drain pump and turn it out clockwise: 4:09 Wipe up the remaining water with the towel: 4:25 Screw in the new drain pump anticlockwise until the lock engages and insert the plug: 4:41 Insert the cover plate and screw it in place with the T20 screwdriver: 4:54 If the furniture front has been removed, put it back in place and screw it tight: 5:08 Insert the cover of the drain pump, sieve, spray arm and lower basket: 5:25 Connect the appliance to the mains: 5:44

Comments