Скачать с ютуб ESP8266 with 6 Relays unit with AI - No Code! (ESP8266 - ESP32) | CADIO Home Automation в хорошем качестве

ESP8266 with 6 Relays unit with AI - No Code! (ESP8266 - ESP32) | CADIO Home Automation

CADIO Website: https://egycad.com/cadio/ CADIO Downloads Center: https://egycad.com/cadio/downloads/ CADIO Developers Docs: https://egycad.com/cadio/docs/discove... CADIO Firmware For ESP8266: https://egycad.com/cadio/docs/firmwar... CADIO Firmware For ESP32: https://egycad.com/cadio/docs/firmwar... --------------------------------------------------------------- I love relays. the easiest method to control home electrical appliances. easy to use. easy to wire. and using relays became easier and easier with CADIO. In this video, we will build a simple unit with the ESP8266 and 6 relays, and 6 beautiful bulbs. and as usual.. we will not write any code at all! Our circuit is too simple. We have the ESP8266. and a 6-channels relays module. The relays module VCC is connected to 5 volts. GND to GND. The relays signal pins to GPIOs, 1, 13, 12, 14, 4, and 5. All relays com pins are connected to the AC hot wire. Every relay normally open pin is connected to a bulb. The 6 bulbs second wires are connected to the AC neutral wire. That's it! Now, let's tell CADIO about our unit architecture. With CADIO firmware installed on the ESP, the ESP has created a WIFI network to receive the info file. From CADIO app, we open the configuration section, and connect the phone to the ESP WIFI network. Now let's make our info file. our relays module is active-low, so we will set relays mode to active-low. And in the devices table, we will add 6 ONOFF devices, and select the GPIOs we are using. Then we send the info file to the ESP, all codes will be generated internally with AI. Now the configuration page appears, we will enter our router WIFI network details, and a name for our unit. After saving the configuration, the unit will connect to our router WIFI network, and connect to the internet, and appear in the application interface! And now, our unit is ready to use! Let's test it!