Скачать с ютуб New Holland T6.120 16x16 Electro Command gearbox calibration в хорошем качестве

New Holland T6.120 16x16 Electro Command gearbox calibration

NH T6.120 Electro Command (16x16) dėžės kalibravimas. Hold both up and down gear buttons. Start the tractor. The release buttons. On the screen is the temperature of the gearbox (39celsius in the video). Release the clutch pedal. Put the gear lever to front position (C&D gears). It will automaticaly choose gear 14. Put the shuttle lever to forward drive position. The tractor will stand still (by the way - handbreak on) :). Then press the bunny button once. In the video it shows CL on screen. It means the gearbox is cold. The best temperature for this procedure is 60 C. Then i press the "bunny" one more time ant it shows "syn" (synchronise). Then press and HOLD the turtle button and the magic happens. Engine revs go up and synchronisation/calibration is in process. After the revs drop and screen shows End. Release the button. Press the bunny once and C1 will appear. Press and hold turtle and wait. Revs go up etc. After "End" release button and it will automaticly switch to C2. Press and hold turtle again until it shows End. Then do the same with C3, Then C4. After C4 is done and you release the button it will show "syn" on screen. Thats it. Calibration done. Stop the engine. Start it again and you're good to go! I hope everything is clear. :)