Скачать с ютуб How To Clean and Restick a ScanNCut Mat в хорошем качестве

How To Clean and Restick a ScanNCut Mat

Learn the methods I use to clean and restick my ScanNCut mats. Easy and inexpensive! PLEASE NOTE: Using a restuck mat using the method shown in your machine MAY void your warranty. If you've owned your machine for less than a year, you may want to wait to try this until after your one year warranty has expired. Also, I share these techniques to hopefully help you but you try them at your own risk. Thanks! Join my e-mail list and receive the 5 Tools Every Cutting Machine Crafter Needs Guide FREE! Click here: https://www.blacksheep303.com/5-tools... ——— S U P P L I E S ——— The links below are compensated affiliate links. This means if you make a purchase using one of these links, I receive a small commission that adds no cost to you. This helps me run my blog and this YouTube channel. I truly appreciate your support! • Kuretake - ZIG - Memory System - 2 Way Glue Pen - Broad Tip ——— https://ldli.co/e/9ddnr7z • ScotchBlue Original Multi-Surface 0.94-in x 60-yd Painters Tape ——— https://ldli.co/e/kqqo7j9 • Brother ScanNCut DX Mat CADXMATSTD12, 12" x 12" Standard Tack Mat ——— https://amzn.to/3F2FO8y • Brother ScanNCut High Tack Fabric Support Sheet ——— https://amzn.to/3sH0OgE TIMECODES & VIDEO HIGHLIGHTS 00:00 Intro 00:45 Warranty warning 01:17 How to clean the mat 03:10 To restick or not to restick? 04:08 How to restick the mat 05:10 Taping the mat edges 05:43 Applying the glue 06:51 The results 07:24 Other types of mats Cleaning and resticking a regular tack ScanNCut mat is actually pretty easy. All you need is a sink, warm water, some mild liquid soap and a sponge to gently scrub the mat clean. If it’s too old and used to have its stick recharged with just a cleaning and air dry, you can restick it with a Zig 2 Way Glue pen. Use low tack tape to protect the non-sticky areas of the mat and then use the glue pen to cover the would-be sticky areas with a thin coat of glue. Let air dry, remove the tape and you can use the mat over and over again! Just repeat the process whenever the mat loses its stick. STEPS TO CLEAN AND RESTICK A SCAN N CUT MAT: 1. Remove the protective sheet from the mat. Take it to a sink and rinse with warm water. 2. Put some mild dish or hand soap on a regular household sponge and gently scrub the surface of the mat. 3. When all of the gunk you can remove has been removed (sometimes stuff can’t be completely removed), rinse the mat clean with warm water. 4. Let the mat air dry. 5. A newer/less used mat may have its stick recharged with just a cleaning. Older, more used mats will probably need to be restuck. 6. To restick a ScanNCut mat, use low tack tape to cover the non-sticky edges of the mat. 7. Take a Zig 2 Way Glue Pen with a broad tip and draw lines of glue across the whole would-be sticky area of the mat. Overlap the lines slightly to avoid missing any spots. Let air dry. 8. If after drying the mat isn’t sticky enough, add another coat of glue and let air dry again. If the mat is too sticky, press a lint free cloth lightly onto the surface and remove to pull of some of the stick. 9. Enjoy! Please refer to the video tutorial or my blog post for more detailed explanations of the above steps. Thanks for watching! Let’s Get Social! Blog: https://www.blacksheep303.com Instagram:   / blacksheep303   Pinterest:   / blacksheep303crafts   Facebook:   / blacksheep303crafts