Скачать с ютуб Cleaning the Glass Inside Your Oven Door в хорошем качестве

Cleaning the Glass Inside Your Oven Door

Read the DIY article that matches this video here: https://www.searspartsdirect.com/diy/... This video from Sears PartsDirect shows how to clean the glass inside your oven door. The best way to reach burnt-on spills is to remove the oven door and take it apart it. Transcript: 1. Remove the oven door Allow the oven to cool if it’s hot. Open the door all the way and use a slot screwdriver to pry down the locking tabs to the unlocked position on both sides of the door. Partially close the door to the broil stop position, which is about 1/4 open. Grip both sides of the oven door and then lift up and out to remove the door. The oven door is heavy so get help if you need it. Set the oven door on a padded surface with the inner panel facing up. 2. Disassemble the door Remove the screws that secure the door handle and vent to the top of the door and pull off the door handle. Carefully flip the door over. Lift the side trim rails slightly and pull off the vent. Remove the screws from the bottom door trim. Lift the outer door panel off and set it on a padded surface with the inner side facing up. 3. Clean the glass If the inner side of the glass on the outer door panel has streaks from a spill, clean it with glass cleaner. If the surface has a textured coating, don’t use a scraper to remove spills. Scraping can damage the textured coating. Clean the outer surface of the middle door glass if it’s dirty. This middle glass surface doesn’t have a textured coating, so you can use a scraper to loosen food streaks. If the inner surface of the middle door glass has grease drips or you see spills on other inner door glass surfaces, remove the bracket screws and lift off the middle door glass with the brackets still attached. Set the middle door glass and bracket on a padded surface and clean the inner surface. Clean the outer surface of the inner door glass if it’s dirty. If the inner door glass has double panes of glass, flip the door over and remove the door hinge screws. Lift the door and move the door hinges out of the way. Flip the oven door back over and remove the heat shield screws and lift the heat shield off. Lift the glass to access last glass surface layers and clean them thoroughly. 4. Reassemble the door Put the glass back in position. Place the heat shield on the inner door panel and reinstall the screws. Flip the door over and position the door hinges under the inner door panel. Reinstall the door hinge screws. Flip the door back over and reinstall the middle door glass. Place the outer door panel on the oven door and reinstall the bottom door trim screws. Slightly lift the side trim rails and slide the top vent onto the door. Lift the door and reinstall the door handle, securing it with the screws. Position the door in the broil position and work the oven door hinges back into the slots on the front of the range frame. Open the door fully and rotate the hinge locking tabs into the range frame. Close the oven door. Call 1-800-437-1673 to speak with a parts specialist. Find parts for your Range at: https://www.searspartsdirect.com/part... Or, click here to schedule an appointment with a repair technician. https://www.searshomeservices.com/rep...