У нас вы можете посмотреть бесплатно etrailer | Optronics Trailer Lights - Clearance Lights - MCL11SAKB Review или скачать в максимальном доступном качестве, которое было загружено на ютуб. Для скачивания выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса savevideohd.ru
Click for more info and reviews of this Optronics Trailer Lights: https://www.etrailer.com/Trailer-Ligh... Check out some similar Trailer Lights options: https://www.etrailer.com/dept-pg-Trai... https://www.etrailer.com Don’t forget to subscribe! / etrailertv Full transcript: https://www.etrailer.com/tv-Demo-Optr... Today we're going to be taking a look at the Optronics LED clearance and side marker Light. This is a small round trailer light that functions as both as a clearance light and a side marker light when properly mounted. It's going to feature a sonically sealed, waterproof housing and lens unit that is submersible. It's an LED light, so LEDs are going to make great replacements for incandescent lights, they last longer, they burn brighter, they're more efficient. You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. This light is going to contain an amber lens, that's going to be a polycarbonate lens and housing when it comes to the construction. It is designed for a recessed mount installation. If we take a measurement of this area right here, that'll tell us the size of the hole we need at the mounting location. It looks like that's going to measure right around 3/4", so a 3/4" diameter hole is needed at the mounting location. It's going to come with an O ring, or a rubber washer there, to provide some cushion at the installation surface and on the opposite side of the installation surface, you would install the locking ring; this is included. That's going to help deter theft of the light. The ring simply secures the light inside of the mounting hole on the trailer. We're looking at a 2-wire design. You going to have your black and white wires. The white wire is for ground, black wire is for power. They're going to have the 0.18 male bullets on the ends and its got the protective sleeve over the wiring. Now the male bullets, those can be cut off for hard wire applications. This light is Department of Transportation compliant. It's a PC rated light. A few dimensions to go over with you real quick, starting with the overall diameter: That's going to give us a diameter of about 1" and then the overall depth, that's going to measure about 7/8" deep. We're going to go ahead and hook it up to power that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights, so you can see it in a low light setting. Now this light only contains one dired, so it's a single LED, but as you can see it's a nice bright light. The power draw at 12.8 volts is 0.082 amps and Optronics is going to put a lifetime warranty on the LED. That's going to do it for today's look at the Optronics LED clearance and side marker light..