Скачать с ютуб How to Check the WEIGHT of a Patient in a Hill-Rom Hospital Bed (pounds or kilograms kg) в хорошем качестве

How to Check the WEIGHT of a Patient in a Hill-Rom Hospital Bed (pounds or kilograms kg)

To check the weight of a patient in a Hill-Rom hospital bed equipped with a built-in scale, follow these steps. Keep in mind that the exact process may vary slightly depending on the specific model of the Hill-Rom bed, but these are the general guidelines: Steps to Check Patient Weight: Ensure the Bed is in the Proper Position: Lower any bed accessories such as side rails, trays, or IV poles that may interfere with accurate weight measurement. Ensure the bed is flat or in a standardized position as per the manufacturer's instructions to avoid weight distribution errors. Zero the Scale (Tare the Bed): Before weighing the patient, you need to "zero" the scale to account for any bedding, pillows, or equipment that might be on the bed. Look for the "Zero" or "Tare" button on the bed's control panel and press it. This will subtract the weight of these items from the final reading, leaving just the patient's weight. Ensure the patient is out of the bed or sitting up if the bed requires that for taring. Place the Patient in the Bed: Once the bed has been zeroed, have the patient lie down in a comfortable position. Make sure that nothing is added or removed from the bed after the zeroing process. Activate the Scale Function: Locate the scale control on the bed’s control panel. This may be labeled "Weigh," "Scale," or have an icon indicating a scale. Press the appropriate button to start the weighing process. The bed will calculate the patient’s weight, and the display will show the value. Read the Weight: The patient’s weight will appear on the control panel display. In some models, the weight is shown instantly, while others may take a few seconds to stabilize. Reweigh If Necessary: If you suspect the weight reading is inaccurate (e.g., patient moved during weighing), you can zero the bed again and repeat the process for accuracy. Tips for Accurate Measurement: Minimize Patient Movement: Ensure that the patient is lying still while the weight is being measured to avoid fluctuations. Remove Non-Patient Items: Ensure that any non-patient items such as trays, laptops, or monitors are not on the bed during the weighing process to get an accurate reading. Consult the User Manual: For model-specific instructions, consult the Hill-Rom bed's user manual, as there may be slight variations in the process depending on the bed type or features. By following these steps, you can efficiently and accurately measure the patient’s weight using a Hill-Rom hospital bed with a built-in scale. Disclaimer: As an Amazon Associate I earn from qualified purchases. #ad