Скачать с ютуб 21st Century Flash Hole Deburring and Chamfering Tool в хорошем качестве

21st Century Flash Hole Deburring and Chamfering Tool

Trying to improve the speed and efficiency of my case prep system I was looking to improve on my tools for the job. My Lyman Flash Hole De-burring & Chamfering tool (FHDCT) need was lacking speed an consistency. Setup of the Lyman FHDCT required an Allen key to adjust the depth of your cut and if you have used one it could be a guess some times to setup and index the case mouth consistently. It is also a trial some times to find the flash hole consistently. Not caliber specific. The 21st Century FHDCT does not require any setup. The bushing fits tightly in new PRVI brass and is easily inserted into a FL sized case mouth. Galling will not be any issue. The shaft of the 21st Century FHDCT runs through the center of the bushing which is floated and turns freely around the shaft. The tool head is design to be chucked into a drill and the bushing helps line up the flash hole perfectly. The tool does not enlarge the flash hold provides a small chamfer to the flash hole. The 21st Century FHDCT stops cutting once it bottoms out on the case and does not require a lot of effort to debur and chamfer the flash hole. The only downside to the 21st Century Tool is the caliber specific bushing. So if you have multiple calibers a separate tool will be need for 6, 6.5, 308, and so on. Which could add up to a lot of cost for a premium tool. So I give it a F-class Community Channel hit on the 8.5 ring. Didn't quite score a V-bull. Also visit and join the discussion on our New Facebook page found in the banner above or link here: https://www.facebook.com/FclassCommun...