Скачать с ютуб KAON AR2140 WiFi 6 EasyMesh Maxis Fibre WPS Pairing Setup в хорошем качестве

KAON AR2140 WiFi 6 EasyMesh Maxis Fibre WPS Pairing Setup

Pre-requisites: AR2140 (Left unit, with white sticker label JERE) is connected to WAN in a controller mode with Internet connectivity AR2140 (Right unit) is pre-configured to be Bridge/Repeater/MAP mode Steps: Step 1: After setting up the pre-requisites, press WPS button on the left unit and followed by the right unit as shown in the video. Step 2: WPS LED on both units will start blinking rapidly and this shows that the pairing is in progress Step 3: The WPS LED on the right unit will become solid static green once the pairing is completed. Step 4: The Internet LED on the right unit will also be lighted up, indicating that the pairing have succeeded. Step 5: Please connect a laptop to the LAN port of the right unit and test Internet connectivity, browsing & streaming before powering it off and relocating the unit to ensure that the pairing is working correctly. Step 6: Once you relocate the right unit away, WPS LED will blink if the RSSI between the secondary node to the master node is weak eg: ⋖-65dBm Step 7: For best WiFi experience and performance, the AR2140 MESH nodes should be connected via Ethernet cable across different floors/areas of the home Refer this link for video guide on how to setup the AR2140 into a MESH node:    • KAON AR2140 Change to MAP/EasyMesh Mo...