Скачать с ютуб How to Set Up Light Poles: Tips and Advice on Thinking Ahead в хорошем качестве

How to Set Up Light Poles: Tips and Advice on Thinking Ahead

Not all the wiring we do for buildings is confined to the INSIDE of the building. Many times, we are tasked with installing site lighting/power to the EXTERIOR of the building and site. But how do we go about installing those light poles? In the latest episode of Electrician U, Dustin goes thru the process of how to prep for the installation and how to install the pole lights themselves. 🤘⚡️EU Learning System⚡️🤘 For Individuals --- https://electricianu.com/learning-sys... For Businesses --- https://electricianu.com/learning-sys... -Video courses on every side of the electrical trade (theory, code, safety, wiring, install, troubleshooting, leadership, and more) -Practice exams for 2017, 2020, 2023 code -YouTube videos categorized and searchable -Audio lessons -Forum -Business version has admin portal and ability to assign learning to technicians and monitor progress -Any business size from 2 techs to 2,000! 🎓💡CONTINUING EDUCATION💡🎓 Sign up here --- https://electricianu.com/continuing-e... -State Approved -Video Based ✍📝PRACTICE EXAMS📝✍ Get them here --- https://www.electricianu.com/electric... -2017, 2020, and 2023 NEC versions -Online Residential Wireman Exam -Online Journeyman Exam -Online Master Exam -300 Question Online Code Cannon (not license specific, all code) -Take as many times as you want -All of the above come with printable PDFs 🎤🎧PODCAST🎧🎤 Spotify: https://open.spotify.com/show/7ldCwdx... Apple Podcast: https://podcasts.apple.com/us/podcast... 📱👍SOCIALS👍📱 TikTok -   / electricianu   Instagram -   / electrician_u   Facebook -   / theelectricianu   Reddit -   / electricianu   Rumble - https://rumble.com/c/ElectricianU Discord -   / discord   🎧🎹Music, Editing, and Videography by Drake Descant and Rob LeBlanc🎹🎧 #electrician #electrical #electricity The first thing we must do is get the conduit run from the source of power TO the pole (or poles) itself. Pole lights generally are rather tall and will require a pole base to sit on. Someone will need to either drill a round hole several feet deep or dig a hole several feet deep. A round cardboard tube will be placed into the hole and project out of the hole a specific distance out of the ground (depending on site specific specifications). Once the rebar cage is installed, the conduits must be turned up and run up out of the top of the pole so they can be accessed via a handhole located in the pole itself, toward the bottom. Important to note that generally a separate ground wire and a rod are usually required at the pole itself. This is in ADDITION to the equipment grounding conductor pulled in with the phase conductors. This additional ground is a grounding electrode conductor, NOT the equipment grounding conductor. Always check with your local AHJ and specifications to see what is needed. Anchor bolts are imbedded in the concrete while it is poured. These bolts are to hold the pole itself down to the base. Somewhere around 1” in diameter (depending on pole height, weight, wind factors, etc.) and are anywhere from 18” to 36” long. 2 sets of nuts/washers will need to be on each bolt, and BOTH must project ABOVE the concrete level. This is important as the bottom set will be used to level the pole base (so the pole stands up straight) while the top set is used to actually fasten the bottom of the pole to the base. Once all that prep work is done, you can start the pole installation itself. It is MUCH EASIER to install the head (or heads) on the pole and pull the wire from the top out of the hand hole while the pole is on the ground. Working at heights always takes longer, requires separate equipment, and carries additional risks that can be avoided. There are several ways to actually stand the pole up onto the pole base, but a sky track (or site forklift) is the standard equipment used. A crane can be utilized for longer poles if needed. A nylon choker/sling is put around the pole and the forks of the lift put thru one of the eyelets and up it goes. It is helpful to have an electrician or two on the ground to guide the pole onto the bolts, just make sure to KEEP YOUR HANDS OUT OF THE WAY!! After the pole is set and the nuts tightened down, the pole is wired into the wires coming from the panel (and perhaps to the next pole(s) in line), the base cap put on to hide the anchor bolts, and the handhole cover installed.