Скачать с ютуб Kia Joice | Bi-Xenon HID Projector & Angel Eyes Headlight Upgrade installation в хорошем качестве

Kia Joice | Bi-Xenon HID Projector & Angel Eyes Headlight Upgrade installation

In this video we show you how to build a regular family car into a pretty rough one! With dimmable Angel eyes as Daytime Running Lights and position lights, in perfect combination with the Mini H1 bi-xenon projectors with the best bulbs available on the moment, the XB35 5500K H1. 𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗲𝘀𝗲 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝘀 𝗵𝗲𝗿𝗲: Mini H1 Twin Kit: https://retrofitlab.com/products/kia-... Angel Eyes: https://retrofitlab.com/products/ange... 𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀: 0:00 Halogen view before we retrofit the Kia Joice 0:08 Remove the clips on the glass and housing by a flat screw driver and heat it in the carton box for about 15 minutes 0:34 When the headlight is heat enough you can open it pretty easily with a flat screw driver, and press the glass of the housing 0:53 Unscrew the inlay to get by the reflector 1:16 Unscrew the bulb holder from the back side so the Mini H1 projectors tail can trough the opening 1:25 Don't forget the rubber ring on the tail, and lock the projector from the back with the included centric ring and nut 1:41 Screw the bulb holder on the tail of the bi-xenon projector and connect the H1 high beam splitter 2:17 Back to the front, you'll put the centric ring on the projector and press the Iris shroud on it (you can use some extra glue for secure fitment) We've mount an SMD Angel Eye on the Iris shroud and use that as city lights 2:36 Put back the inlay and lock it by the screws again 2:52 Mostly extra butyl isn't needed here, but to be sure we put some extra new grey butyl in there, press it in the housing 3:16 Press the glass back on the housing and heat it again for about 15 minutes in the carton box 3:31 When it's heated the glass slides in the housing when you press a little, lock it with some clamps and let it cool down and press the clips back on the housing and glass 3:58 Connect the T10 position light with the Angel eyes and the dimmable wire with the + of the low beam (when you turn on the low beam, the angel eyes will dim from DRL to position lights) 4:16 Drill a hole of 22mm in the cap for the rubber and wires 4:31 Put all the wires in the housing and mount the H1 xenon bulb. Connect the two plugs with the original H7 connector 5:01 Clean it a little before you put it back in the car 5:22 Final view, SMD Angel eyes as DRL and position light when you turn on the low beam bi-xenon projectors. Here we use the best XB35 5500K H1 bulbs for a perfect match and perfect light output! 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁: • Much better light output • Double high beam (xenon + halogen) • No glare • Lower energy consumption (35 watt instead of 55 watt) • Luxury OEM look 𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻: • Kia Joice (1999 - 2003) • Kia Carstar (1999 - 2003) 𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:   / europeanheadlightcommunity   𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻: Facebook:   / retrofitlab   Messenger: https://www.m.me/Retrofitlab/ Instagram:   / retrofitlab.com_official   Our website: https://www.retrofitlab.com/ 𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆: Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon. A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style! The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time. Do you have any questions? Do not hesitate to contact us, we are happy to help you out! Good luck with your retrofit! These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage. #Kia #Joice #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID #Retrofit #LED #custom #improvement