Скачать с ютуб etrailer | Detailed Breakdown of the 2-5/16" Hitch Ball в хорошем качестве

etrailer | Detailed Breakdown of the 2-5/16" Hitch Ball

Click for more info and reviews of this CURT Trailer Hitch Ball: https://www.etrailer.com/Trailer-Hitc... Check out some similar Trailer Hitch Ball options: https://www.etrailer.com/dept-pg-Trai... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Curt... Today we're going to be taking a look at Part Number A-6, this is the CURT two and five-sixteenth inch trailer hitch ball. A few measurements to go over with you real quick. This hitch ball is going to give us a shank diameter of an inch and a quarter, it's going to give us a shank length measuring from the bottom of the platform to the end of the threads of two and five-eighths of an inch. This is designed to fit draw bar thicknesses of a half inch to one inch thick. The hitch ball is going to offer a capacity of ten thousand pounds. It's made from a solid steel construction with a nice chrome finish on it, so it is going to stand up really well against rusting and corrosion. Here on the sides of the platform, it's going to have the flats, these are just your wench flats, makes for an easier installation, you can get your wrench around there for a nice, adequate grip. Really going to come in handy when you need to torque this down. The hitch ball will need to be torqued to specifications listed by the manufacturer. You can find all that information on the tag that's going to come attached to the trailer hitch ball. You just want to make sure that you remove this tag before your installation. Really simple installation though. The hitch ball is going to go straight through that opening on your ball mount. You're going to place on the lock washer as well as the nut, and then you're going to get everything tightened down, and again once you get it hand tight, or once you get it tight with a wrench, you will need to go ahead and torque it down to the specifications listed by the manufacturer. It looks like for this particular mount, it says to tighten the trailer ball to four hundred and fifty foot pounds of torque. That's going to do it for our review of Part Number A-6, this is the CURT two and five-sixteenth inch trailer hitch ball. .