Скачать с ютуб How to Install Outside Mount Cellular Shades в хорошем качестве

How to Install Outside Mount Cellular Shades

Inside Mount Cell Shades shades are easy to install, in this short video you will learn how to install them. Learn more at http://blnds.cm/29KbxBv Cellular Shades are easy to install, in this short video you will learn to install them. A screwdriver is all that’s needed to install your blinds; or for an easier installation you can use a cordless screwdriver or a drill with a ¼” Hex head bit. Before starting, carefully unpack your blinds and mounting hardware. To familiarize yourself with the contents of your box, check the printed instructions included with your product. Begin your installation by positioning your shade on the wall surface where you want it to be mounted. Mark the top of the headrail 2 ½” in from the left and right outside edges of your shade with a pencil. Align the top of your left bracket along the inside of your pencil line and fasten to the wall with the supplied screws. Repeat on the right. Use any additional center support brackets that may be included; the proper number of brackets will be included based on the width of your shade. Install your headrail by hooking the front of the bracket and rotating down to snap into place. Finish by lowering and testing your new shade. To lower your shade, pull the cord toward the center of your shade and slowly raise your hand while holding onto the cord. To raise your shades, pull the lift cord away from your shade at any angle. And that’s it, if you still have any questions about the installation of your shade just give us a call, it’s that easy.