Русские видео

Сейчас в тренде

Иностранные видео


Скачать с ютуб I made a wooden box from firewood with hand tools only в хорошем качестве

I made a wooden box from firewood with hand tools only 3 года назад


Если кнопки скачивания не загрузились НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу страницы.
Спасибо за использование сервиса savevideohd.ru



I made a wooden box from firewood with hand tools only

A simple little dovetailed box made from birch firewood. I use a scrubplane and a jackplane to flatten one side of, before riving off a plank using a chisel. Since the pieces are short, the jackplane is used to square up the sides. I was lucky to find som really straight pieces with very even grain. When rived, the grain stays parallel to the sides, making it very easy to plane in any direction. I use a shop made shooting board with a Veritas shooting plane to square the ends of the boards. The dovetails are cut with a progressive pitch Dovetail saw from Lie Nielsen. It is filed 16ppi and progressively decreases to 9ppi. The waste is removed using a fret saw (often called a Jewelers saw) The tails and pins are refined using chisels. I finished it with some shellac, but it turned out way too yellow. I have since removed and reapplied the finish. This time with a lighter shellac. No machines or power tools were used for this project :-) Hope you like it. Feel free to subscribe! Tools used: Scrubplane Jackplane Blockplane Shootingplane Chisels Marking gauge Dovetail saw Crosscut saw Fret saw Mallet Dovetail marker

Comments