Скачать с ютуб CUSTOM Marvel Legends Doc Ock Tentacles! *AMATEUR CUSTOMIZER* в хорошем качестве

CUSTOM Marvel Legends Doc Ock Tentacles! *AMATEUR CUSTOMIZER*

Please LIKE and SUBSCRIBE, and help me reach my 1,000 subscribers goal! Materials used: 4pcs. bendy LED USB keyboard lights (https://shopee.ph/product/38608491/59...) This is just a Chinese brand, I think you can look up a same kind in Amazon pliers, or anything you can cut the bendy lights with. driller (I used a screwdriver that has a bit more than the diameter of the tentacle holes. I don't have a driller, and for me the screwdriver worked!) super glue cutter or x-acto knife blower or hot water (optional) NOTE: THE NO GLUE APPROACH - I did have a different approach at the top 2 holes Vs. the 2 lower holes. I just drilled and loosen the 2 upper holes a little bit, just enough so the wires could fit in (not as wide as the lower holes in the video), heated up the area to get it soft, and stuck the wires in. After the plastic cooled down, it tightens up and hold the wire pretty well. Then I find out that I didn't need glue after all. :/ It's too late on the 2 lower holes. It will become tight enough that the wires will not come off easily. NO SUPER GLUE NEEDED! Just friction. NO DRILLER METHOD - I don't have any drillers so I drilled it manually by using a screwdriver. Just use a screwdriver that is wide enough that can loosen the holes up a bit. Keep on turning and twisting inside the holes. Just be mindful to not over-drill. Thanks to the other collectors who did the same before me! There are many other tutorials out there who helped me accomplish this but the credit goes to the first one who came up with this amazing idea! I hope you find this video tutorial helpful. Good luck! Check out my Instagram,   / mpmtoys_  , for more photos! I post my action figure photographs there and other geek stuff! Follow MPM Toys on Facebook!   / mpmtoys   #SpiderMan #MarvelLegends #Hasbro