Скачать с ютуб Mr Coffee Barista repair - no milk / froth в хорошем качестве

Mr Coffee Barista repair - no milk / froth

IMPORTANT: High pressure and high temperature are highly dangerous and may lead to an injury or death. Let the machine cool down overnight. Do not attempt if you are unsure of your skills. The video is for information only. I assume no responsibility for you attempting the repair. Mr Coffee Barista is an excellent machine. However, the milk froth feature is a bit finicky. Every few month, I have to clean the milk container's tubing of milk crud. I briefly touch on this in the video, however this video goes into more detail:    • Cafe barista repair easy for no foam   Recently, cleaning the tubing would no longer help. The frother would hesitate for 15 seconds, then work, but very slowly. It would take a few cycles to fill up the cup. Upon somebody's comment, I took the pressure chamber inside the machine and discovered a lot of crud inside. This crud was blocking the frother tubing. This video touches on tearing down and disassembling the machine and shows the location of the pressure chamber. All you need to do is unbolt 4 large bolts on the chamber and clean it out with a scotch brite and maybe some vinegar. My machine had a lot of crud that appears to be bits of corrosion from inside the chamber. This crud was blocking the top tube that feeds the frother. The torque spec on the bolts appear to be about 1.5-2Nm - it should be tight, but not super tight, or you will damage the seal. IMPORTANT: High pressure and high temperature are highly dangerous and may lead to an injury or death. Let the machine cool down overnight. Do not attempt if you are unsure of your skills. The video is for information only. I assume no responsibility for you attempting the repair.