Скачать с ютуб How to Charge Refrigerant (Gas) in an AC unit? в хорошем качестве

How to Charge Refrigerant (Gas) in an AC unit?

Charging refrigerant in an AC unit involves adding the right amount of refrigerant gas to ensure the system operates effectively. Here's a simple explanation of the process: Safety First: Make sure the AC unit is turned off and unplugged. Safety goggles and gloves are recommended. Locate Service Valves: Find the service valves on the AC unit. There are typically two valves – a larger one called the low-pressure or suction valve and a smaller one called the high-pressure or discharge valve. Attach Gauges: Connect refrigerant gauges to the service valves. The blue gauge connects to the low-pressure valve, and the red gauge connects to the high-pressure valve. Connect Refrigerant Cylinder: Attach a refrigerant cylinder to the yellow hose on the gauges. Make sure the cylinder is in an upright position. Start the AC: Turn on the AC unit and set it to its maximum cooling mode. The compressor should start running. Add Refrigerant: Slowly open the valve on the refrigerant canister. This allows refrigerant to flow into the AC system. Watch the pressure gauges as you do this. The pressure readings should rise as the refrigerant enters the system. Monitor and Adjust: Continuously monitor the pressure readings on the gauges as you add refrigerant. Stop adding refrigerant when the pressures approach the recommended levels for your AC unit. Close Cylinder Valve: Close the valve on the refrigerant cylinder once the desired pressures are reached. Disconnect Gauges: Safely disconnect the gauges from the service valves. Be careful as there might be a small release of refrigerant when disconnecting. Test AC: Let the AC run for a while to ensure that it's cooling effectively. Check the temperature of the air coming out of the vents. Check for Leaks: If you needed to add a significant amount of refrigerant, it's a good idea to check for any leaks in the system. Leaks should be repaired before adding more refrigerant. Remember, handling refrigerant requires proper training and knowledge to ensure safety and proper functioning of the AC unit. If you're not comfortable with these steps, it's best to consult a professional HVAC technician to charge the refrigerant for you.