Скачать с ютуб sonik xtractors recon custom cork в хорошем качестве

sonik xtractors recon custom cork

sonik xtractors recon 8ft 3tc step 1 started off cutting the shrink wrap handle off with a razor blade then scraping the excess glue off the bank step 2 measure the diameter of your the the carbon xtractors recon 8ft 3lb is 14mm xtractors recon 8ft 3.5lb is 15mm step 3 then you can order you the cork you need Harrison Preformed Double Flared Cork ‘A’ Grade is the one in the video 16mm to 18mm tapered cork step 4 using a lighter or a hair dryer to heat up the bottom end cap the careful you're removing it step 5 cutting the cork to size using a new blade using 1 inch masking tape to make the cork a snug fit as seen in the video step 6 mixing the epoxy (don't use the quick drying one) and spread it all over the masking tape and the blank then put your cork on working the epoxy in the scrape your excess off then put your end cap back in making sure that's the logo is straight with the reel seat step 7 leave to dry for 12/18hours link to the cork https://tacklebox.co.uk/rod-building/... if you call them they are a big help