Скачать с ютуб How to Replace Front Strut & Spring Assemblies 2008-2013 Nissan Rogue в хорошем качестве

How to Replace Front Strut & Spring Assemblies 2008-2013 Nissan Rogue

Buy Now! New Strut & Spring Assembly from 1AAuto.com https://trq.video/ia-1ASTS01481 New Strut & Spring Assembly from 1AAuto.com https://trq.video/ia-1ASTS01482 This video shows you how to install new front strut & spring assemblies from TRQ on your 2008-2013 Nissan Rogue. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. Estimated installation time for a professional technician is approximately: 3 hours 36 minutes This repair was done on a 2013 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2008 Nissan Rogue 2009 Nissan Rogue 2010 Nissan Rogue 2011 Nissan Rogue 2012 Nissan Rogue 2013 Nissan Rogue Tools you will need: • Flat Blade Screwdriver https://trq.video/obUv-1AXAA00013 • Pocket Screwdriver • 20mm Wrench • 21mm wrench • 13mm Socket https://trq.video/ocvv-1AXAA00015 • 18mm Socket • 21mm Socket • Induction Heater • Locking Pliers https://trq.video/oqD-1AXAA00139 • Pliers • 3/8 Inch Breaker Bar • Ratchet https://trq.video/ocvd-1AXAA00016 • Socket Extensions https://trq.video/ocvv-1AXAA00015 • Torque Wrench https://trq.video/obwK-1AXAA00044 • Gloves https://trq.video/obHP-1AXSS00048 • Safety Glasses • 6mm Hex Socket • Floor Jack https://trq.video/oaPA-1AXAA00068 • Jack Stands https://trq.video/oaA9-1AXAA00065 • Wheel Chocks Subscribe:    / @trq   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.