Скачать с ютуб How to Replace Front Lower Ball Joint 11-14 Chrysler 200 в хорошем качестве

How to Replace Front Lower Ball Joint 11-14 Chrysler 200

Buy Now! New Ball Joint from 1AAuto.com https://trq.video/ia-1ASBJ00288 Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball in socket joint can wear out over time, or the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new quality TRQ ball joints on your 2011-14 Chrysler 200. • Check here for more videos on the 2011-14 Chrysler 200:    • Chrysler 200 2011-2014 1st Gen   This repair was done on a 2013 Chrysler 200 Touring 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles: 2011 Chrysler 200 2012 Chrysler 200 2013 Chrysler 200 2014 Chrysler 200 Tools you will need: • Flat Blade Screwdriver https://trq.video/oath-1AXAA00013 • 18mm Socket • 19mm Socket • Ball Joint Press • Pickle Fork • Side Cutters • 1/2 Inch Impact Gun https://trq.video/oic-1AXAA00252 • Air Chisel • Ratchet https://trq.video/oaBH-1AXAA00016 • Torque Wrench https://trq.video/oXd-1AXAA00044 • Cotter Pin • Chisel https://trq.video/ogD-1AXAA00055 • Hammer • Ratchet Strap Subscribe:    / @trq   Check out our playlist: Chrysler 200 2011-2014 1st Gen:    • Chrysler 200 2011-2014 1st Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.