Скачать с ютуб Autocad Civil 3D - Box Culvert - Kutu Menfez в хорошем качестве

Autocad Civil 3D - Box Culvert - Kutu Menfez

Create box culvert with assembly and its calculation. Tip kesit ile kutu menfez çizimi ve hesaplarının yapılması. Contact for assembly: [email protected] *Skewed box culvert is not drawn with box culvert assembly. *Kutu Menfez tip kesiti ile verevli menfezler çizilememektedir. OPERATIONAL STEPS Objective: To draw and calculate a culvert project for an existing road. *It should be noted that detailed projects for the culvert are required for precise calculations. 1. A water flow analysis will be conducted on the existing surface to determine the location for the culvert. 2. An approximate horizontal alignment and profile for the culvert will be drawn. 3. Assembly for the culvert will be created, and enter the planned project dimensions. 4. A corridor for the culvert body will be established. 5. Along the culvert alignment on the main road, a cross-section will be created. Using this cross-section, the culvert body and wing sections will be marked, and these sections will be displayed along the culvert alignment. 6. The horizontal alignment and profile will be revised based on the culvert length. 7. To create the wing sections in the culvert corridor, the corridor will be divided into 3 parts, and assembly will be defined. 8. Excavation calculations for the slopeless culvert will be made (excavation surface will be established, cross-sections will be created, and volume calculations will be performed). 9. The culvert excavation will be converted into a sloped excavation. 10. The volume of concrete and grout for the culvert will be calculated. 11. A 3D Solid model will be created from the culvert assembly, and this model will be displayed along the profile of the main road.