Скачать с ютуб How to Replace Rear Brakes 2008-2013 Nissan Rogue в хорошем качестве

How to Replace Rear Brakes 2008-2013 Nissan Rogue

Buy Now! New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ic/1ABFS01792 This video shows you how to install new, quality TRQ brake pads and rotors on your 2008-2013 Nissan Rogue. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This process should be similar on the following vehicles: 2008 Nissan Rogue 2009 Nissan Rogue 2010 Nissan Rogue 2011 Nissan Rogue 2012 Nissan Rogue 2013 Nissan Rogue Tools you will need: • Flat Blade Screwdriver http://1aau.to/obgG/1AXAA00013 • 17mm Wrench http://1aau.to/oTT/1AXAA00010 • 14mm Socket http://1aau.to/obor/1AXAA00015 • 21mm Socket http://1aau.to/oado/1AXAA00043 • Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/oaT/1AXAA00288 • Brake Caliper Hanger http://1aau.to/oh4/1AXAA00439 • 1/2 Inch Impact Gun http://1aau.to/orN/1AXAA00252 • Ratchet http://1aau.to/obwi/1AXAA00016 • Socket Driver • Socket Extensions http://1aau.to/obor/1AXAA00015 • Torque Wrench http://1aau.to/oazT/1AXAA00044 • Brake Grease • Brake Parts Cleaner • Gloves http://1aau.to/oWT/1AXSS00048 • Paper Towels http://1aau.to/oBh/1AXSS00035 • Safety Glasses http://1aau.to/oP5/1AXAA00343 • Floor Jack http://1aau.to/oZI/1AXAA00068 • Jack Stands http://1aau.to/oRc/1AXAA00065 • Wheel Chocks • Wire Brush http://1aau.to/osa/1AXAA00079 Subscribe:    / @trq   Check out our playlist: Nissan Rogue 2008-13 1st Generation:    • Nissan Rogue 2008-13 1st Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.