Скачать с ютуб ✅ How to install metal stud framing 👉 Install channel in a doorway 🪚 drywall в хорошем качестве

✅ How to install metal stud framing 👉 Install channel in a doorway 🪚 drywall

🔥 Drywall partition ▶︎ How to Build a metal framed wall (70mm profiles)    • 🔥 Drywall partition ▶︎ How to Build a...   Do you know the uprights and channels? Its composition is galvanized steel type DX51D and galvanized Z140 or Z275 that make up the framework of the load-bearing structure of partitions, cladding, shelves, shelves and drawers. The C-shaped profile that is installed in a vertical position and that fits inside the channel is called a stud. The U-shaped channels constitute the horizontal element that is fixed to the floor at the top and bottom. Both profiles have a knurled aspect that ensures the fit. The uprights present in their soul, notches or openings in the form of H that facilitate the passage of installations, for example electricity, plumbing... There are several sizes but the most used are the 48mm and 70mm uprights and channels. The uprights, despite the fact that when we work we use the name 48 or 70, one thing to know is that they always have a millimeter less than the channel so that they fit well inside it. For example, the 48 is 46.8mm wide and the 70 is 68.8mm. What are partitions? The partitions are a partition system made up of a metallic structure of horizontal channels attached to the upper slab and to the floor, and vertical uprights embedded in the channels. One or more laminated plasterboards are screwed to this structure on each side, the quantity, thickness and type of which will depend on the technical needs of the partition itself. The partitions are used as partition systems for interior rooms. They cannot act as load-bearing walls, but they provide a solution to all the requirements demanded by the CTE of: -Fire protection. -Acoustic isolation. -Robustness and impact resistance. - Quality of finish.