Скачать с ютуб Removing the Canon C200 EVF (Important: check description)/ Ronin-M в хорошем качестве

Removing the Canon C200 EVF (Important: check description)/ Ronin-M

IMPORTANT: Insulate the flat cable pins before putting it in the cam's body, even the plastic parts of the camera are made of a conductive plastic from the inside!!! Remember! Removing your EVF is on your own risk! All needed parts for full B conversion are: Top cover for B version - DB1-9745-000 back cap for B version - DB1-9746-000 2x Longer screws for top of the B back cap - DB1-8807-000 2x Longer screws for botton of the B back cap - DB1-9599-000 Here is a spare parts scheme from Canon. http://360creative.bg/wp-content/uplo... The needed covers for the full conversion are 8 and 9 from group *2, and screws 106x2 and 107x2 (around 45 EUR total) - You have to insulate good the pins of the flat EVF cable with electrical tape for ex. and put it down in the body - if you want to remove the cable completely - you must unscrew the front ring (6 screws) and the right cover (10 screws) and carefully disconnect the cable from the camera body (by opening the black lock plate on the cable connector) after that, carefully remove the cable to the side, not to the back, also be careful not to fold it) This video shows how to remove the viewfinder of the C200 and use it on a Ronin-M Gimbal with all extra controls of the native LCD. Unlike the "Canon's EVF removal service" - This process is 100% reversal so you can reinstall your EVF whenever you need it. Please be sure that you are using the right screwdriver and you're pushing down when rotating or you can irreversibly damage the screw heads. Subscribe to our YouTube channel for more videos Also you can follow us on http://360creative.bg/   / 360creative.bg     / 360creative.bg   Music By Joakim Karud - Loudness Clarity Song/Free Download -    • Видео   Support Joakim Karud - http://smarturl.it/joakimkarud