Скачать с ютуб AFE Intake Unboxing & Install Tutorial for a 21 Ram TRX. в хорошем качестве

AFE Intake Unboxing & Install Tutorial for a 21 Ram TRX.

**WARNING SEVERAL F-BOMBS USED** Tools Required 8mm,10mm,11mm deep socket, 13mm T30 Torx Bit, 3mm Allen key 3 inch & 12 inch extension Ratchet, plastic trim pry tool, knife. My apologies of the length of the video, it's was all done in real time, also covers what not to do for removing the temperature sensor, an issue with things not lining up correctly and an issue with the supplied weather stripping. This actually took me longer to install than the Ripatuned Incognito Pulley, because of the smaller parts and more detail. If you have watched my previous tutorial videos, you will see everything is very detailed and designed so people with a minimal skill set can install their intake by themselves. The squeal you hear is from the Incognito pulley not the intake. I did notice that I hit 13psi of boost, I haven't seen that before as the Incognito brought me to 12. However the colder weather is likely why I saw the extra psi. Have a question, comment below or message me via IG @National_TRX