Скачать с ютуб Fitting a Second Consumer Unit Part 2 в хорошем качестве

Fitting a Second Consumer Unit Part 2

I needed a second consumer unit to be dedicated to power things out side the house in the front and rear gardens. I wanted to keep outside devices separate so if there are any problems with accidental damage it shouldn't effect power in the house. Once I have power outside I plan to carry out with my smart home automation project including lighting, camera systems, smart irrigation and water sprinklers... In this second part I have had a double pole 100amp isolation switch fitted after the main service head and before the meter. The meter out runs to two Henley blocks, again 100amp rated. The henly block then supplies the existing consumer unit. In the next video a second consumer unit will be fitted and supplied from the Henley blocks. The whole system can now be isolated by the double isolation switch making it easier to work on the system if needed. All Parts in the series Part 1 :    • Fitting a Second Consumer Unit Part 1   Part 2 :    • Fitting a Second Consumer Unit Part 2   Part 3 :    • Fitting a Second Consumer Unit Part 3   Part 4 :    • Fitting a Second Consumer Unit Part 4   Caution: Anything like this should be only done by a qualified professional. Never do anything like this yourself without the proper qualifications. This video is for entertainment purposes and doesn't constitute advice in anyway whatsoever. Also, check out my Outside Electrical Cabinet Series:    • Outside Electrical Cabinet |  Power S...