Скачать с ютуб Blackmer Gas Compressor Disassembly - Blackmer Whiteboard в хорошем качестве

Blackmer Gas Compressor Disassembly - Blackmer Whiteboard

During this video we will be disassembling a Blackmer Reciprocating Gas Compressor starting at the valve caps and going all the way down to the connecting rods. This video shows the proper tools to use and helpful best practices to make the assembly of the reciprocating gas compressor go much smoother. You will need the following tools to complete this work: ½” Drive Breaker Bar ½” Drive Ratchet ½” Drive x 1-1/16” Socket 3/8” Drive x ½” Socket 3/8” Drive Ratchet ½” Combination Wrench 9/16” Combination Wrench 3/8” to ½” Socket Adapter Arbor Press (metal rod sized to press out bushings) Needle Nose Pliers Small Pick or Flat Head Screwdriver (removing o-rings) Large Bolt (driving out wrist pin) Plywood shims used to remove connecting rod cap (1/2” thick shim, and two ½” thick shims) Black Marker Soft/Hard Tip Rubber Mallet Large Bolt (driving out wrist pin) Blackmer Special Tools for Disassembly: • Valve Tool 798016 • Piston/Nut Tool 798003 • Packing Ring Tool 798015 This video is applicable to all the Blackmer Compressor models shown below: LB081, LB082, LB161, LB162, LB361, LB362, LB601, LB602, LB942, LB943, HD082, HD161, HD162, HD163, HD172, HDL172, HD173, HDL173, HDL322, HDL323, HDL342, HDL343, HD361, HD362, HDL362, HD363, HDL363, HD372, HDL372, HD373, HDL373, HD602, HDL602, HD603, HDL603, HD612, HDL612, HD613, HDL613, HDL642, HDL643, HD942, HDL942, HD943, HDL943, NG082, NGS082, NG162, NGS162, NG172, NGS172, NG362, NGS362, NG372, NGS372, NG602, NGS602, NG612, NGS612, NG642, NGS642, NG942, NGS942