Скачать с ютуб Upgrading Bambu Lab AMS: Hydra AMS Install & Test 🛠️ в хорошем качестве

Upgrading Bambu Lab AMS: Hydra AMS Install & Test 🛠️

UPDATE: After several months using the hydra mod with no issues and using reels of different sizes with out issues, I have removed it and gone back to standard. The issue was the filament I used to print the mod, cheap ABS, cracked at the rollers near the feeder and it caused the rollers to skip and the filament to jam. Would I do it again, no, because most of the reels I have work with the standard AMS and for the few that don't I can use my Prusa or use the external reel holder on the Bambu Lab. But if you are interested in trying the Hydra, I will leave this up because the instructions to dismantle are still the same. Join me as I upgrade my Bambu Lab 3D Printer AMS with Humebeam's custom Hydra AMS modification! I'll walk you through dismantling the AMS, installing the Hydra AMS, and running a test print and checking some sample reels. Say goodbye to filament reel size issues? 🚀 Join the community of fellow 3D printing enthusiasts and subscribe to my channel for more tips, tutorials, and upgrades for your 3D printing journey. WARNING: This is not an instructional video, nor is it a recommendation to convert/modify your AMS to Hydra AMS. This is an overview of what I have done to my own AMS and the results I see. Converting or modifying your AMS will void your warranty and could break your AMS, if you decided to do it, you do so at your own risk. Hydra Models by HumeBeam on Printables.com AMS - https://www.printables.com/model/3921... PTFE Load Buttons - https://www.printables.com/model/4109... Silica desiccant boxes - https://www.printables.com/model/4551... Jayo Spool Adapters by Jack Siegel on Printables.com - https://www.printables.com/model/3657... Chapters 00:00 Intro 00:46 Opening Title 00:56 Disassemble AMS 02:27 3D Printing Parts (Time lapse) 03:05 Assembling Hydra AMS 06:08 Installing Desiccant Boxes & PTFE Load Buttons 06:18 Place Filament into Hydra AMS 06:34 Load Filament into AMS after powering up 07:05 Run First Multicolor Test Print 08:46 Filament Reel Fitting Test 09:39 Conclusion #bambulab #bambu #bambulabx1carbon #3dprinting #homemade #timelapse #diy #timelapsevideo #printables #gadgets #hydra #hydraams