Скачать с ютуб Elevate Volvo P3 3L T5 Polished Port Exhaust Manifold в хорошем качестве

Elevate Volvo P3 3L T5 Polished Port Exhaust Manifold

The Elevate Volvo P3 3.0L T6 Polished Port Exhaust Manifold increases power and torque by helping evacuate exhaust gases from the combustion chamber and more efficiently delivering these gases to the turbocharger. Using proprietary abrasive flow media technology, our process polishes the internal ports by removing the rough cast finish which maximizes air volume, flow and velocity. There are several steps in creating the Elevate Polished Port Exhaust Manifold. Starting with a used core manifold, we inspect for any issues on either of the sealing surfaces and scrap any that are not within specification. We remove the factory studs and media blast the manifold to remove rust and allow us to further inspect the unit. Once the unit passes secondary inspection, the magic to the ports happens. The Abrasive Flow Media process uses a putty-like polymer media that is saturated with fine abrasives. The abrasive laden media is forced through the ports at very high-pressure, multiple times. By forcing the abrasive putty through the ports, inner wall material is removed at a controlled rate, leaving the surface optimally smooth, polished, and restriction free. We remove only enough material (about 1mm to all internal surfaces) to create the finished surface desired, without removing too much material which could compromise port wall integrity. Once the internal ports are polished, we ensure the mounting surfaces are true, and coat the exterior of the manifold with a matte black high heat coating. New studs are installed on the manifold, and the unit is ready to ship with the new gaskets and copper plated locking flange nuts to mount to the head and mount the turbo. Installation is a direct replacement for the factory unit with no other modifications required. Learn more and order on-line at https://www.elevatecars.com/store/vol...