Скачать с ютуб Arduino as ISP Programmer DIY в хорошем качестве

Arduino as ISP Programmer DIY

Hi, Friends.. I had some questions on how i program my Attiny Microcontrollers which i used in some of my projects.. So here is how i built my "Arduino as ISP" Programmer. Here is the pinout for the Arduino Nano: Pin 7 ---- control LED "programming" (+220 ohm resistor) Pin 8 ---- control LED "error" (+220 ohm resistor) Pin 9 ---- control LED "heartbeat" (+220 ohm resistor) Pin 10 ---- RESET of target µ controller Pin 11 ---- MOSI of target µ controller Pin 12 ---- MISO of target µ controller Pin 13 ---- SCK of target µ controller +5 Volt ---- VCC of target GND ---- GND of target Go to files -- examples -- Arduino as ISP and upload this sketch to your Nano or Uno befor you connect the 10µF capacitor between Reset and GND. Then go to files --- preferences -- and copy this URL into --- additional board manager: http://drazzy.com/package_drazzy.com_... Then go to tools -- board -- boardmanager --- search for " attiny core" and click install. If you want to upload a sketch to an attiny with the Arduino as ISP programmer.. Choose your board -- select programmer "Arduino as ISP" -- and dont forget to press shift and upload. ( upload with programmer) If you have a brand new attiny, burn the bootloader first... Otherwise it will not work.. And here is the link for the attiny reference sheet: /www.akafugu.jp/posts/resources/reference-sheet/ If you want to support me and my work out here in the shop, you can do so under patreon.com:   / larifari   #ArduinoasISP #AttinyProgrammer #ISPProgrammer