Скачать с ютуб Epoxy Injection Resin Paste Cartridge | Epoxy Injection Ports | Low Viscosity Epoxy Crack Injection в хорошем качестве

Epoxy Injection Resin Paste Cartridge | Epoxy Injection Ports | Low Viscosity Epoxy Crack Injection

https://sealboss.com +1 714-662-4445 https://sealboss.com/contact/ SealBoss 4050 SLV Epoxy Resin Super Low Viscosity High Strength, High Modulus, Epoxy Injection Resin Adhesive SealBoss ® 4050 Applications Structural Concrete Crack Injection Welding Cracked Concrete Segments Delaminated Slab Repair Natural Rock, Masonry, Concrete, Wood Gravity Feed or Pressure Injection of Cracks in Concrete, Masonry, Rock, Wood, etc. Seal Interior Slabs and Exterior Above-Grade Slabs SealBoss ® 4050 Advantages SealBoss ® Product-Pump-Packer System Solution Super Low Viscosity, Deep Penetration Formula Convenient Easy Mix Ratio A:B = 2:1 by Volume Advanced Flow, Solvent Free Formulation VOC Free This Product is for Professional Use Product Description SealBoss ® 4050 SLV Epoxy Resin is a 100% solids, hi-mod, 2-component, moisture-tolerant, super low viscosity, high strength, multipurpose, epoxy injection resin adhesive. SealBoss ® 4050 SLV Epoxy Resin meets ASTM C-881/ AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C. Ask your SealBoss ® technician for details. The product is for professional use. Installation Guidelines SealBoss ® 4050 SLV Epoxy Resin is composed of two components. The mixing ratio by volume is 2:1 (A:B). Concrete Crack Injection: SealBoss ® 4050 SLV Epoxy Resin is suited for the injection of cracks, voids and fissures in concrete. The very low viscosity of the material provides for superior penetration at low to medium injection pressures. SealBoss ® 4050 SLV Epoxy Resin bonds well under pressure and offers high tensile and compressive strength properties for structural repairs. Injection can be performed in moderate moist environments. Best results and highest strengths are achieved in dry conditions. Do not modify the product if used for injection. For best results, epoxy injection must only be performed with approved two component injection equipment. SealBoss ® provides tested and proven two component injection pumps and accessories. First prepare the surfaces adjacent to the cracks to expose clean, sound concrete. The injection ports should be spaced from 8 in. (20.3 cm) to 36in. (91.4 cm) apart depending on the crack width and the thickness of the member to be injected. Crack should be sealed at the surface with SealBoss ® 4500 QuickSeal Epoxy Paste NSF or SealBoss ® 4500 F QuickSeal Epoxy Paste. SealBoss 4040 LV Epoxy Resin High Strength, High-Modulus, Low-Viscosity, Epoxy Injection/Grouting/Sealing/Binder Adhesive Epoxy Injection Resin Epoxy Crack Injection Structural Repairs SealBoss ® 4040 Applications Structural Epoxy Crack Injection Welding Cracked Concrete Segments Delaminated Slab Repair Natural Rock, Masonry, Concrete, Wood Gravity Feed or Pressure Injection of Cracks in Concrete, Masonry, Rock, Wood, etc. Seal Interior Slabs and Exterior Above-Grade Slabs SealBoss ® 4040 Advantages SealBoss ® Product-Pump-Packer System Solution Proven, High Strength, Low Viscosity Product Convenient Easy Mix Ratio A:B = 2:1 by Volume Advanced Solvent Free Formulation This Product is for Professional Use Product Description SealBoss ® 4040 LV Epoxy Resin is a 100% solids, hi-mod, 2-component, moisture-tolerant, low-viscosity, high-strength, multipurpose, epoxy injection resin adhesive designed for high strength repairs, epoxy injection and epoxy crack injection in concrete substrates such as floors, ceilings, walls, foundations and more. The epoxy adhesive can also be used for wood. SealBoss® 4040 LV Epoxy Resin meets ASTM C-881/ AASHTO M-235, Types I, II, IV, V* Grade 1, Classes B & C (*with exception of gel time) Ask your SealBoss ® technician for details. The product is for professional use. Installation Guidelines SealBoss ® 4040 LV Epoxy Resin is composed of two components. The mixing ratio by volume is 2:1 (A:B). Concrete Crack Injection: SealBoss ® 4040 LV Epoxy Resin is suited for the injection of cracks and voids in concrete. The low viscosity of the material provides for good penetration at low to medium injection pressures. SealBoss ® 4040 LV Epoxy Resin bonds well under pressure and offers high tensile and compressive strength properties for structural repairs. Injection can be performed in moderate moist environments. Best results and highest strengths are achieved in dry conditions. Do not modify the product if used for injection. For best results, epoxy injection must only be performed with approved two component injection equipment. SealBoss ® provides tested and proven two component injection pumps and accessories. First prepare the surfaces adjacent to the cracks to expose clean, sound concrete. The injection ports should be spaced from 8 in. (20.3 cm) to 36in. (91.4 cm) apart depending on the crack width and the thickness of the member to be injected. Crack should be sealed at the surface with SealBoss ® 4500 QuickSeal Epoxy Paste NSF or SealBoss ® 4500 F QuickSeal Epoxy Paste.