Скачать с ютуб How to Replace Rear Upper Control Arms 2003-2007 Honda Accord в хорошем качестве

How to Replace Rear Upper Control Arms 2003-2007 Honda Accord

Buy Now! New Control Arm with Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASFK01749 New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASRU00069 This video shows you how to install new rear upper control arms from TRQ on your 2003-2007 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2003 Honda Accord 2004 Honda Accord 2005 Honda Accord 2006 Honda Accord 2007 Honda Accord Tools you will need: • Pry Bar http://1aau.to/oXR/1AXAA00020 • 10mm Socket http://1aau.to/obke/1AXAA00017 • 14mm Socket http://1aau.to/obFy/1AXAA00015 • 17mm Socket http://1aau.to/obFy/1AXAA00015 • 19mm Socket • Needle nose pliers http://1aau.to/oE5/1AXAA00051 • Needle nose pliers http://1aau.to/oE5/1AXAA00052 • Pliers • 1/2 Inch Impact Gun http://1aau.to/ovi/1AXAA00252 • 3/8 Inch Impact Gun • Ratchet http://1aau.to/obI7/1AXAA00016 • Torque Wrench http://1aau.to/oaNo/1AXAA00044 • 1 Inch Wrench • 1-1/16 Inch Wrench • Gloves http://1aau.to/oaoY/1AXSS00048 • Safety Glasses • Floor Jack http://1aau.to/oacp/1AXAA00068 • Hammer • Jack Stands http://1aau.to/oZe/1AXAA00065 • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.