Скачать с ютуб DIY Volvo Power Steering Pump Controller and Camaro Drifting в хорошем качестве

DIY Volvo Power Steering Pump Controller and Camaro Drifting

This video goes through how I made a CAN bus controller for an electric Volvo power steering pump and put it in my drift Camaro. Then we have some drone footage from Spirit Peaks Raceway at the end. ~~~ READ BEFORE ATTEMPTING ~~~ Please note that I made a mistake in the video regarding the power steering rack lines. It should be that the 16mm (top port on the rack) is the return line and the 18mm (bottom port on the rack) is the high pressure. The diagram in the Github repo has been updated to show the correct information. I also had issues with the controller working unreliably due to the MCP2515 board not getting enough voltage. It needs at least 4.75V to operate and the Nano would sometimes output below that threshold. I now recommend powering the MCP2515 directly from the 12-5V converter rather than from the Arduino as shown in this video. ~~~~~~~~~~~~~~~~~~~~~~~~~~ Links to the Google doc of parts I used and links to the diagram and code are in the pinned comment below. Credits for code used for making the Arduino script: https://github.com/NMSTEC/Volvo_EPS_FREE https://github.com/rusefi/rusefi/blob... https://gist.github.com/mck1117 00:00 - Introduction 01:44 - Install Overview 05:53 - Making the Controller 09:03 - Uploading the Code 11:41 - More Wiring 14:57 - Controller Enclosure 17:45 - Pump in Action 18:55 - One last caveat 19:37 - Wrapping up 20:34 - Drift footage Correction: 4:50 The high and low pressure fittings should be switched, M16 for high and M18 for low. The diagram linked in the description is updated to show this correctly. Correction: 9:30 Links for other people's code I used to create this script is in description