Скачать с ютуб etrailer | Review of Optronics Trailer Lights - Tail Lights - STL43A24B в хорошем качестве

etrailer | Review of Optronics Trailer Lights - Tail Lights - STL43A24B

Click for more info and reviews of this Optronics Trailer Lights: https://www.etrailer.com/Trailer-Ligh... Check out some similar Trailer Lights options: https://www.etrailer.com/dept-pg-Trai... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Optr... Today we're going to take a look at the Optronics Amber submersible stop turn and tail led trailer tail light. Now this is around led trailer tail light that will serve three functions, stop light, tail light and a turn signal light. The sonically sealed waterproof housing and lens is submersible. It is a durable polycarbonate lens and housing and the LEDs make great replacements for incandescent lights because they'll last 50 times longer, they're more efficient because they'll provide brighter light with less power output and of course no bulbs to replace, no brittle filaments to break.This one is an Amber lens over white LEDs. Now this is compatible with 12 volt and 24 volt DC systems. To mount this, it is a recess mount design. It does use a grommet. We do sell that separately on our website as part number A45GB and we do list it on this product page as a related product and it'll mount in any 360 degree position.It does accept the industry standard three prong plug and again, those we sell separately. It's part number A45PB or A47PV. This slide is DOT, Department of Transportation compliant. Again, this is 10 diodes. The power draw at 12.8 volts for the stop and turn signal is 0.208 amps for the tail light signal is 0.027 amps. They do offer a lifetime warranty on the LEDs. I want to give you some dimensions and then we're going to plug it in just to show you how bright the light is.So the overall diameter, you can put a rule on that is four and five sixteenths of an inch. And the thickness I'm going to measure including where the plugin goes is going to be right at one and 15/16 of an inch.So what we're going to do I attached a three prong plug right here to our 12 volt power. So we'll line up the poles and go ahead and plug it in. And with it plugged in we'll go ahead and turn the power on and you can see there's your 10 LEDs coming on. I'll go ahead and turn off the overhead lights and there it is as a tail light function. And then when you apply the brakes, you'll get a brighter brake light.And then for the turn signal, when you put your turn signal on, you can get your turn signal light. Go ahead and turn back on our overhead lights, turn off our power, but that should do it for the review on the Optronics Amber submersible stop turn and tail LED trailer tail light.