Скачать с ютуб Finding top dead center and distributor installation in your flat fender Willy’s engine в хорошем качестве

Finding top dead center and distributor installation in your flat fender Willy’s engine

✅ The engine firing order is 1-3-4-2 ✅ The rotor always turns in a counter clockwise rotation ✅ The distributor shaft has an offset key-way, that mates into the oil pump, the oil pump is driven off the camshaft. ✅ when your motor is at top dead center (TDC) the distributor rotor should be at the 5 o'clock position or #1 ignition wire when the oil pump is clocked correctly ✅ If the timing marks on the flywheel do not show up when using a timing light, you could be 180 degrees out, easiest way is to move all the ignition wires in the distributor cap 180 degrees in any direction ✅ The tapered dowel pins on the crank to flywheel when in time should be at the 3 and 9 o'clock position ✅ Military flywheels have 4 timing marks, --ignition (5 degrees BTDC), --TDC or TC top dead center, --IO intake open, --EC exhaust closed ✅ Civilian flywheels have 2 timing marks, --TC, --5 degrees BTDC ✅ MB GPW Slat Grill early open type distributor, IGC used on all early L134 jeep engines from November 1941 thru October 1944 includes, cap, rotor, points, and condenser, complete drop in unit that will work with 6 volts or 12 volt system https://www.rfjp.com/p-432-distributo... https://www.joesmotorpool.com/small-d... ✅ Distributor, 4 cyl, L134 flat head or F134 overhead valve motor, IAD dustproof used on all L134 F134 late October 1944 thru 1971 includes, cap, rotor, points, and condenser, complete drop in unit that will work with 6 volts or 12 volt system https://www.rfjp.com/p-1511-distribut... https://www.joesmotorpool.com/large-d... Special thanks to Jimmy Strauss Jeeps for the use of the shop https://www.jimmystraussjeeps.com/