Скачать с ютуб pl92t elizabeth warm up and 1st coffee (10minutes for 220-240v - 11minutes for 120v) в хорошем качестве

pl92t elizabeth warm up and 1st coffee (10minutes for 220-240v - 11minutes for 120v)

During the warm up the coffee machine Elizabeth brings the temperature of the coffee boiler above the temperature setpoint. 4:46 in this case the coffee boiler probe is at 120°C, but the temperature erogated to the coffee is around 90°C. This is necessary to heat faster the metal part of the coffee boiler. We suggest to proceed always with a short purge 5:09 with button 1 and button 2 (purge mode) in order to rinse the coffee group. But even if the purge is not done the temperature indicated on the display doesn’t influence the temperature of the extraction as the first brewed coffee is always colder than the second one. It means that the machine needs a higher temperature of the water in order to compensate the temperature of the group which has not reached the correct temperature yet. The temperature for the extraction is quite accurate. We suggest to use the coffee machine at 95°C of temperature for a few days, after at 92°C of temperature for some other days in order to understand your personal taste. Once you turn on your coffee machine the temperature shown on the display is 10°C less then the value measured by the probe. This number is managed by the PID in the value EC. The temperature of the water is going to heat 10°more(than the setpoint) in order to harmonize the temperature of the water used for the coffee with the temperature indicated on the display.