Скачать с ютуб Proxmox GPU/PCIE passthrough в хорошем качестве

Proxmox GPU/PCIE passthrough

Setting Proxmox up to allow a GPU to passthrough to a virtual machine. Websites I used as references https://pve.proxmox.com/wiki/Pci_pass... https://www.reddit.com/r/homelab/comm... Edit GRUB nano /etc/default/grub Change this line from GRUB_CMDLINE_LINUX_DEFAULT="quiet" to GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_acs_override=downstream,multifunction nofb nomodeset video=vesafb:off,efifb:off" save file and update grub update-grub Reboot the node Edit the module file VFIO = Virtual Function I/O nano /etc/modules Add these lines vfio vfio_iommu_type1 vfio_pci vfio_virqfd save and reboot IOMMU remapping (some systems are not good at mapping the IOMMU, this will help) nano /etc/modprobe.d/iommu_unsafe_interrupts.conf options vfio_iommu_type1 allow_unsafe_interrupts=1 nano /etc/modprobe.d/kvm.conf options kvm ignore_msrs=1 Blacklist the GPU drivers (this will kkeep the host system from trying to use the new GPU) nano /etc/modprobe.d/blacklist.conf blacklist radeon blacklist nouveau blacklist nvidia blacklist nvidiafb Adding GPU to VFIO lspci -v Look for your GPU and take note of the first set of numbers this is your PCI card address. Then run this command lspci -n -s (PCI card address) This command gives use the GPU vendors number. Use those numbers in this command nano /etc/modprobe.d/vfio.conf options vfio-pci ids=(GPU number,Audio number) disable_vga=1 Run this command to update everything update-initramfs -u Then restart the server. Make a new VM Bios is OMVF(UEFI) Machine is q35 Start the new VM and make sure remote desktop is active and find the IP Adress Not affiliate Links https://www.ebay.com/usr/theartofserv... https://www.amazon.com/dp/B06XT1Z9TF?... #LoResDIY My Channel:    / loresdiy