Скачать с ютуб HOW TO | Intake Manifold Clean | Complete DIY step-by-step removal | Pajero | 4M4 в хорошем качестве

HOW TO | Intake Manifold Clean | Complete DIY step-by-step removal | Pajero | 4M4

Complete DIY step by step instruction on how to remove the intake air manifold for cleaning from a Mitsubishi Pajero - diesel with a fuel injected 4M4 engine. This clean was done on a 2007 NS Pajero. Also applies to Mitsubishi Showgun with a 4M4 engine. See the common build up of carbon soot from exhaust gas recirculation with oil mist, causing a loss of engine power performance. Restore diesel engine power by cleaning the air intake manifold. The video breaks down the air manifold removal into three phases. Phase 1: Setup 1. Get the gasket and oven cleaner 2. Remove second battery 3. Remove engine cover 4. Clean engine bay Phase 2: Upper intake manifold removal 1. Remove main battery 2. Disconnect intake air hose 3. Remove top engine bracket 4. Remove EGR + pipe 5. Remove fuel filter 6. Remove throttle valve 7. Remove upper air intake manifold Phase 3: Lower intake manifold removal 1. Remove fuel lines 2. Remove fuel common rail 3. Remove lower intake manifold Phase 4: Cleaning will be showed in a separate video Phase 5: Re-assembling will be showed in a separate video Phase 6: Starting car and test drive results will be showed in a separate video Thanks to the Pajero Club forum members where I gathered this information from. www2.pajeroclub.com.au